Baofeng and Signalink

Signalink makes a cable to connect a Baofeng or Wouxun or Kenwood HT to their nifty little box.  The cable is called a SLCABHTW.     One of the nic things is the internal wiring is the same as if you are using the 6 pin DIN connector and you can use the SLMOD6PM jumper module with it.

If used with direwolf and RMS/Express it is plug and play.    If you are using the Baofeng/Signalink combination with FLDIGI you need to tell FLDIGI to make sure in
Configuration->Sound Card->Right Channel you have "Modem signal on right and left channels" selected.     With that, life is great.