Kenwood TM-V71 Setup with FLDIGI

   

How I get my Kenwood TM-V71 VHF/UHF radio to work with FLDIGI

One time settings on radio:
Need both Serial and Packet Cables 
         Pink Audio Cable to PC MIC input 
         Green Audio Cable to PC Headphone input 
               ****  Pull Pink cable out until you see static on waterfall display  
                     or get mono-F to stereo-M adapter     *****    
   PR1 Setting in Kenwood setup program to 7+ 
   9600 Baud 
   Channel A or B does not seem to matter

Make sure Radio is put into EchoLink Sysop mode -  PowerOn+PF2 
    
FLDIGI Settings:
Audio->Devices =C-Media USB Audio Device (Capture and Playback) 
   Audio->Right Channel = Uncheck All 
   Rig->RigCAT = uncheck use RigCAT 
   Rig->Hardware PTT =  Use separate serial port  PTT  
                                     = Device = /dev/cu.usbserial  
                                     = Use RTS  
                                     = Use DTR